Update (July 29, 2014) : Those who are using Linux or Symbian OSs, must download the new USM certificate from USMrootCA since USM has updated its certificate. After installing this certificate according to second step, in the step "17", select "USMrootCA" instead of "PPKT Certificate Auth....". Also its is necessary to change "user name in use" and "Realm in use" to "user define" and write your full university's email address as your user name. Then follow from step 18 to the end.
Today I’m going to explain how to configure your Nokia Symbian OS to be able to connect to USMSecure for USM students and staff.
I’ll show you the step by step process using following pictures. So just follow them.
1. Download USM wireless certificate from here ( CA PPKT Univesiti Sains Malaysia, USM )
2. After download, transfer it to your mobile via Bluetooth, USB cable or simply use a card reader. Then go to your phone and run it. Answer Save and Yes to all questions.
3. go to Menu and select Tools:
4. Select Setting
5. Select “Connection” ( the third option)
6. Select “Destinations”
7. Select “Internet”
8. Press “Option” and then “select new access point”
9. Answer “No” to this question.
10. Select “Wireless LAN”
11. Do everything like following pictures and select “WLAN security mode” then select “WPA/WPA2” :
12. Select “WLAN security setting”
13. Change WPA/WPA2 to “EAP” (If it’s not by default) and then press “EAP plug-in setting”
14. Select EAP-PEAP and Enable it and Disable all the others.
15. Now select the enabled “EAP-PEAP” and press “Edit”:
16. Select “Authority certificate” and press Change bottom.
17. Go down and find “ PPKT Certificate Authority “
18. Check all setting in current page with picture below :
19. Here in the “Setting” tab, Press right arrow to select “EAPs” tab. Like step 14 Enable “EAP-MSCHAPv2” and Disable all the other options.
20. Select “EAP-MSCHAPv2” and Press “Edit”
21. Insert your User Name ( Student/Staff email such as majid06_yhu83@student.usm.my or majid06_yhu83@usm.my for staff) and your NIRC or Passport Number in password field. Confirm other setting with following picture.
22. Now go back for all setting and go in Step 7 and according to picture change the priority of connection to 1.
23. It’s done. You can open your browser and explore in internet. Please do not hesitate to contact me any enquiries should you have. It has been tested on Nokia N96,N8 and C7 and it works for your Nokia definitely.
8 comments:
On behalf of PPKT, USM, thank you for your info. It very helpful for student and staff in USM..I'm also admin http://blog.eng.usm.my/myweblog. Thank.
Hi, I am Derec from health campus USM. I have setup my phone according to your setting. However, it just shown connecting and without change to connected.
Is it because of certificate problem ? Do I need a different certificate in health campus ? Thanks.
This is also works on SE Satio! Thank you very much! =)
You're welcome
Connect to USM wireless and download certificate that USM has provided. Then disconnect and do the setup for USMSecure and try to connect to USMSecure.
Good luck
you're welcome. It was my pleasure to help a schoolmate :)
I can't download USM wireless certificate because the URL has been blocked. So how to download it?
Post a Comment